Color Television Assembly in Shahnoor Electronics.

Abstract

This report is about assembling of a color television. The parts are imported from China and the assembling section of Shahnoor Electronics assemble those and if necessary color television is taken under servicing department. The television is made up of four principal sets of parts: the exterior part or housing, the picture tube, the audio (sound) reception and stereo system, and the electronic components (parts). These electronics parts include cable and antenna input and output devices, a builtin antenna in most television sets, a remote control receiver, computer chips, and access buttons. The color television (CTV) assembly section was under the supervision of my mentor. That is why I got the clear idea on assembling a CTV. I worked on attachment of felt sheet to the front panel, setting main PCB (Printed Circuit Board) inside the cabinet, and connecting the speakers. To ensure the better service for the customers, warranty sticker on the back side of the CRT was placed. I placed the CRT very carefully by tapping four screws at its four corners. Then I plugged on the wires of power cord, sensor, speakers etc. sequentially on the main PCB. Few adjustments like color, brightness, contrast etc. were performed by me. By using magnetic machine I also checked horizontal and vertical adjustments. Sound quality, channel tuning, A/V input output ports were checked by me before back cover docking. I performed ground test at the final stage of assembly. At servicing station I did not have hands-on experience rather observed technicians doing there jobs and for better understanding they provided me few flow charts so that I could follow their works.