Abstract:
Latest technologies demand for low voltage and low power in designing both analog and digital
integrated circuits. The purpose is to incorporate as much devices as possible into a single chip
and to operate them in low voltage in order to minimize power loss. On the other hand, many
electronic blocks such as oscillator, data converter (AID or Df A) etc. require a precise reference
yoltage so as to work properly even when there is supply, process and temperature variations. A
Bandgap reference circuit (BGR) plays a vital role, in this case, that provides a low reference
yoltage that is exempt to temperature, process and supply variations. In this project, a 1.2V CMOS Bandgap reference circuit with supply voltage range of 1.8V to 2V
in associated with active regulated circuits is proposed. The reference circuit is designed to
operate at an ambient temperature of 27°C with line regulation of 177.5mVN and a temperature
coefficient of 241 ppm/DC. The reference circuit composed of a supply independent block (which
is basically a common-gate-Op Amp) that keeps the reference immune to supply variation to
some extent. Another part of the reference circuit is the temperature independent block that is
designed in such a way that the reference has negligible impact with temperature variation and
also it debilitates the effect of process variation with temperature. An equation is derived for the
clear understanding of how process variation is affecting the reference voltage. Lastly, the values
obtained from the design simulation are compared with the other proposals. A two stage operational amplifier with a gain of around 70dB is designed to demonstrate the
adverse effect of varying reference on its gain. Owing to its high open loop dc gain, the Op Amp
shows a significant change due to small change in its biasing voltage. The gain of the Op Amp
varies from 13%-15% due to variation in temperature and 60%-130% due to the variation in
supply. So active regulated circuits are proposed that incorporate negative feedback mechanisms,
in order, to subside the reference voltage to 1.2V, for a wide range of temperature from -55DC to
+1650C. The analyses are carried out in Advanced Design System (ADS) software using TSMC
0.18wn technology.
Description:
This thesis submitted in partial fulfillment of the requirements for the degree of B.Sc in Electrical and Electronic Engineering of East West University, Dhaka, Bangladesh.