EWU Institutional Repository

CIGS solar cell device simulation Silvaco

Show simple item record

dc.contributor.author Amin, Fariha
dc.contributor.author Fairuz, Tanzia
dc.date.accessioned 2019-04-23T08:52:06Z
dc.date.available 2019-04-23T08:52:06Z
dc.date.issued 2018-02-19
dc.identifier.uri http://dspace.ewubd.edu/handle/2525/3051
dc.description This thesis submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Electronics and Telecommunication Engineering of East West University, Dhaka, Bangladesh en_US
dc.description.abstract In this paper, the investigation and optimization of (CIGS)-based solar cells were analyzed and designed by Silvaco-1D software. This paper deals with the influence of a thickness of intrinsic layer, doping density of n-type layer and for different types of TCO layers on the performance of the CIGS-based solar cells. The J-V characteristics and the photovoltaic parameters have been calculated assuming a good optimized structure. Our simulated results exhibit how the absorber and buffer layers thickness, defect density influence the short-circuit current density Isc is 34.235344 , open-circuit voltage Voc is 0.51, fill factor FF is 0.934, and efficiency (η) of solar cell. The optimized solar cell shows an efficiency of 16 % under the AM1.5G spectrum and one sun. en_US
dc.language.iso en_US en_US
dc.publisher East West University en_US
dc.relation.ispartofseries ;ECE00182
dc.subject CIGS solar cell device simulation Silvaco en_US
dc.title CIGS solar cell device simulation Silvaco en_US
dc.type Thesis en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Advanced Search

Browse

My Account